Properties of the internal structure and the natural properties of the triangular alloy Al - 17 wt% Ni- 10 wt% Cu
DOI:
https://doi.org/10.54172/mjsc.v27i1.259Keywords:
Internal structure Properties , Natural properties , Triangular alloyAbstract
Al-17 wt.% Ni-10 wt.% Cu alloy was prepared by melt spinning technique and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, and scanning electron microscopy. The resulting ribbon microstructure consists of intermetallic Al7Cu4Ni globular-like structure embedded within an aluminum matrix. The resulting effect of rapid solidification on mechanical properties is the enhancement of the alloy hardness up to 700 HV. The ternary phase Al7Cu4Ni exhibits hardness as high as 1300 HV.
Downloads
References
Bauccio, M. ASM Metals Reference Book. (ASM Int. Sixty Printing) ; (2001).
L. F Mondolfo. Aluminum alloys, structure and properties, Bullerworths, London, (1976). DOI: https://doi.org/10.1016/B978-0-408-70932-3.50008-5
M. Kaczorowski, B. Dabrowski, H. Matyja, Mater. Sci. Eng. (1977), 29, 2, 189-192, DOI: https://doi.org/10.1016/0025-5416(77)90126-4
Olofinjana, A.O., Atrens, A., Mater. Lett. (1997), 31, 87. DOI: https://doi.org/10.1016/S0167-577X(96)00253-4
Downloads
Published
How to Cite
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright of the articles Published by Almukhtar Journal of Science (MJSc) is retained by the author(s), who grant MJSc a license to publish the article. Authors also grant any third party the right to use the article freely as long as its integrity is maintained and its original authors and cite MJSc as original publisher. Also they accept the article remains published by MJSc website (except in occasion of a retraction of the article).
